600mm high radiators in the UK: widths, panel types and what fits your wall
600 mm is the most common height for a radiator under a window, so there is a good chance your replacement is a 600 mm one. The height is the easy part. What decides whether it fits is the width, the panel type and the space around it. This page shows how to narrow down a 600 mm replacement: which type to pick, what to leave free above and below, and when your existing pipes will still line up. For measuring pipe centres and tails, use the main page. Here we only cover what is specific to 600 mm
As an Amazon Associate we earn from qualifying purchases. This does not change your price.
Our picks
Type 22 double panel radiator, 600 mm high
Two panels and two fin layers give more output than a Type 11 of the same width. The deeper body suits pipes that stand well off the wall.
View on AmazonAdType 11 single panel radiator, 600 mm high
The slim body keeps the radiator close to the wall. It is the usual match for a short wall to pipe distance.
View on AmazonAdType 21 (P+) radiator, 600 mm high
More output than a single convector and a shallower body than a double. Useful when Type 22 is too deep.
View on AmazonAdSolid chrome radiator extension tails, 1/2 in BSP
Closes the gap between valve and tapping per side, so the pipes can stay where they are.
View on AmazonAdAngled TRV and lockshield set, 15 mm (e.g. Drayton TRV4)
A fresh pair avoids leaks from old valve seats when the radiator is off the wall. The TRV head gives room by room control.
View on AmazonAdRadiator brackets for panel radiators
Brackets must fit the specific panel type and wall. Wrong brackets change the depth and the pipe alignment.
View on AmazonAdCommon buying mistakes
- Ordering by height and width only and ignoring the panel type, which changes the depth.
- Measuring the height with the top grille and the valves included.
- Choosing a Type 22 for a hallway or a narrow space and finding it sticks out too far.
- Ignoring the sill and the floor gap, so the top grille or the air flow is blocked.
- Reusing old brackets that do not suit the new panel type.
- Switching from Type 22 to Type 11 to save space without checking whether the room still gets enough heat.
Why is 600 mm such a common height?
It fits under most standard window sills and gives a good amount of output for the width of wall available. For this reason most ranges list 600 mm in a long run of widths. If you have a lower sill, the 500 mm and 400 mm heights exist for that case, and the pipe height may change.
Can I swap a 600 mm radiator for a taller or shorter one?
You can, but the tappings move. A taller radiator rises up the wall while the bottom tappings stay low, so a like-for-like height is the simplest swap. A different height means checking the pipe height from the floor and the gap to the sill, and often means moving the pipes.
Does the same width in Type 11 and Type 22 give the same heat?
No. At the same width and height, more panels and more fins give more output. Type 22 gives clearly more than Type 11. Compare the output figures on the maker's data sheet for the exact model, not the type name. If you only change type to save space, check the room does not lose heat.
How much clearance do I need around a 600 mm panel?
Follow the installation sheet of the model you buy. As a rule of thumb, makers ask for a gap below so air can rise through the panel and the floor can be cleaned, and a gap above so the top grille is not covered. Treat any figure here as an assumption until you have checked the sheet.
Will the old pipes line up if I keep the same width?
Usually yes if the new radiator has the same width and the same tapping layout. The remaining variable is depth. A deeper body moves the tappings away from the wall, which can bend the pipe or the tail. Check the wall to pipe distance against the drawing before you order.
FAQ
What are the standard widths for 600 mm high radiators?
Ranges usually run from around 400 mm up to 2000 mm or more in steps of 100 mm or 200 mm. The exact list differs by maker, so check the range of the model you want.
Is a 600 mm high radiator the same as a 24 inch one?
Not exactly. 24 inches is about 610 mm, and old imperial radiators were built to different dimensions. Measure your old body in millimetres and compare it with the maker's figures.
How deep is a 600 mm high Type 22 radiator?
Around 100 mm for many models. The figure differs by maker, so use the technical drawing of the radiator you plan to buy.
Can I fit a 600 mm radiator under any window?
Only if the sill leaves room above the top grille and the floor leaves room below. Measure the free height and compare it with the installation sheet. If it is tight, a 500 mm radiator may suit better.
Do I need new valves when I swap a 600 mm radiator?
Not always. If the valves are in good condition and the tappings line up, you can reuse them. Old valves can leak when disturbed, and replacing them is cheap compared with a leak. Draining the system and fitting valves is a job for a competent person.
Does this page cover heat output sizing?
No. It covers fit only. For a heat loss calculation, use the maker's tool or ask a heating engineer.
More guides
- Radiator pipe centres size guide UK: how to measure and match
- How to Measure Radiator Pipe Centres
- Radiator wall distance: how to measure it and what to do with the number
- Radiator valve spacing check for UK replacements
- Double panel radiator sizes UK: Type 21 and Type 22 height, width and depth
- Standard radiator sizes in the UK: heights, widths and panel types
- 700mm high radiators in the UK: widths, clearances and fit
- 400mm high radiators in the UK: which width and type fits